Table of Contents
Advertisement
<< SETUP MODE >>
PICK TIMER
Screen 27
<< SETUP MODE >>
X X . X
Screen 28
<< SETUP MODE >>
TIME-OUT SET
Screen 29
TIME-OUT SET
X X X X S
Screen 30
M3099EX/EH OEM Manual
B3.14 Setting picking time
When you set the picking time, you must set as follows.
S
B3.15 Setting time-out limit
When you set the time-out limit, you must set as follows.
39 Press [Mode 1] and [Mode 2] at a time to see
Screen 25. The settings are stored to
EEPROM.
40 When you close the setup mode, go to 9.
41 At Screen 2, press [Mode 1] fourteen times to
go to the PICK TIMER screen. (Screen 27)
42 Press [Mode 2] to see Screen 28. (The default
setting is 2 sec.)
43 At Screen 28, press [Mode 1] until the digit
you want to change blinks. Then press [Mode
2] until the digit changes as you want. (The
specifiable range is from 0.5 to 99.5 sec. in
0.5 sec. step.)
44 Press [Mode 1] and [Mode 2] at a time to see
Screen 27. The settings are stored to
EEPROM.
45 When you close the setup mode, go to 9 .
46 At Screen 2, press [Mode 1] fifteen times to
go to the TIME-OUT SET screen. (Screen
29)
47 Press [Mode 2] to see Screen 30. (The default
setting is 30 sec.)
SETUP MODE
B-11
Advertisement
Table of Contents
