Print Prohibit Areas On The Front And Back Surfaces - Fujitsu M3099EX/EH Oem Manual

Reading
reference
position
M3099EX/EH OEM Manual

Print prohibit areas on the front and back surfaces

Printing in area A on the front of a document may, in rare case,
cause a document size detection error. Printing in area B on the
front and back of a document may, in rare case, result a double feed
error. Figure 6.3 shows print prohibit areas on the front and back
surfaces.
Note: Figure 6.3 shows the document as viewed from the reading
surface.
113
79
15
Front side
Reading surface
10 10
Center of document
Figure 6.3 Print prohibit areas on the front and back surfaces
134
(Unit: mm)
96
10 10
34
Top of document
DOCUMENT
SPECIFICATION
: Area A
: Area B
Bottom of document
6-5