Requirement After Parts Replacement - Panasonic KV-S2045C Service Manual

10.3. Requirement After Parts Replacement

The following adjustments are required when a circuit board assembly or part is replaced.
Replaced circuit board assembly or part
CONTROL Board
STARTING POSITION SENSOR Board
CIS (Front)
CIS (Back)
Sensor Roller (Front)
Sensor Roller (Back)
Drive Roller
Exit Roller
Others (When assembling or disassembling parts
which will affect the scanning positions)
Waiting Sensor (WAITING SENSOR Board),
Starting Position Sensor (STARTING POSITION
SENSOR Board), or Ending Sensor (ENDING
SENSOR Board)
Note
*1 When All Position is done, the setting values except for the value set in the Individual Position will be renewed.
1. Adjust Shading.
2. Adjust All Position.
3. Adjust Individual Position, manually as required.
*1 1. Adjust Vertical Position (for Front and Back) and Length in Individual Position
or adjust All Position.
*1 1. Adjust Shading.
2. Adjust All Position or the following adjustment should be needed.
a. Adjust Front Vertical Position in Individual Position.
b. Adjust Front Horizontal Position in Individual Position.
*1 1. Adjust Shading.
2. Adjust All position or the following adjustment should be needed.
a. Adjust Back Vertical Position in Individual Position.
b. Adjust Back Horizontal Position in Individual Position.
1. Adjust Shading.
1. Adjust Shading.
*1 1. Adjust Length in Individual Position or adjust All Position.
*1 1. Adjust Length in Individual Position or adjust All Position.
*1 1. Adjust the following adjustment or All Position.
a. Adjust Front Vertical Position in Individual Position.
b. Adjust Front Horizontal Position in Individual Position.
c. Adjust Back Vertical Position in Individual Position.
d. Adjust Back Horizontal Position in Individual Position.
1. Adjust Sensor Sensitive Level.
Note
Before this execution, the following cleaning is needed.
a. Waiting Sensor and its reflector sheet
b. Starting Position Sensor and its reflector sheet
c. Ending Sensor and its reflector sheet
79
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
Required adjustment