KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
8.4.8.
STARTING POSITION SENSOR Board
(1)
Remove the CIS (Front). (See 8.3.13.)
(2)
Remove the screw.
(3)
Disconnect the CN502 and remove the STARTING
POSITION SENSOR Board.
Reassembling Note
When reassembling, pay attention to the location
between the board and its support plate.
8.4.9.
WAITING SENSOR Board
(1)
Remove the Conveyor 5. (See 8.3.4.)
(2)
Remove the Paper Feed Roller Module. (See 8.3.11.)
(3)
Remove the screw.
(4)
Disconnect the CN501 and remove the WAITING SENSOR
Board.
58