8.3.3.
Conveyor 2
(1)
Push the ADF Door Release to open the ADF Door.
(2)
Open the Imprinter Door. (See 8.2.3. - (1) in case of the
Product KV-S2025C/SU225C Series)
(3)
Remove the screw with spacer.
(4)
Slide the Conveyor 2 in the direction of the arrow.
(5)
Pull out the Conveyor 2 to the rear of the unit and remove
it.
Note
There is a locking section reverse-side of the
Conveyor 2.
Reassembling Note
Attach the Conveyor 2 so that the claws on the left
side of it match with the slits of the chassis.
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
43