8.4.2.
RELAY (FRONT) Board
(1)
Remove the Rear Cover. (See 8.2.4.)
(2)
Disconnect all connectors from/to RELAY (FRONT) Board
and remove it.
(3)
Remove the 2 screws.
Reassembling Note
Reassemble the connectors to CN516 and CN517,
paying attention to the direction to insert.
8.4.3.
RELAY (BACK) Board
(1)
Remove the Inner Cover (Upper). (See 8.2.7.)
(2)
Remove the 2 screws.
(3)
Release the cables from the clamps.
(4)
Disconnect all connectors from/to RELAY (BACK) Board
and remove it.
Note
Be careful when disconnecting the all connectors
on the RELAY (BACK) Board.
8.4.4.
POWER SW Board
(1)
Remove the Power Box Cover. (See 8.3.1. - (1), (2))
(2)
Remove the 2 screws (A).
(3)
Disconnect the CN809 and CN810.
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
55