(7)
Remove the 4 screws (B) to release the plates from the CIS
(Back).
Reassembling Note
· The width of CIS used in Product KV-S2025C /
SU225C Series differs from that of CIS used in
Product KV-S2045C/SU245C Series.
On account of this, pay attention to the screw
position to attach the plates to each CIS as
shown in the figure.
8.3.15. Paper Feed Motor
(1)
Remove the Feed Tray. (See 8.2.8.)
(2)
Remove the 2 screws.
(3)
Disconnect the connector to remove the Paper Feed Motor.
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
51