Scanner Counter; Scanner Information - Panasonic KV-S2045C Service Manual

Classified Error Code
Code
ST1 ST2
— 00 00
— 0A 00
— 0B 00
U10 10 00
U11 11 00
U12 12 00
U13 13 x
U16 16 00
U18 18 00
U23 1C 00
U30 20 00
F20 8A x
F21 8B x
F22 8C x
F23 8D x
F24 8E x
F25 8F x
F26 90 x
F27 91 x
F28 92 x
F29 93 x
F30 94 x
F31 95 x
F50 40 00
F51 41 00
F55 45 00
F68 54 x
F69 55 x
Table 9.3.4 Error Code
9.3.3.

Scanner Information

This function provides various types of scanner information to user or service-person. Main contents are as follows.
1. Product ID
2. Firmware Version
3. Board and Gate Array (LSI) version
4. SCSI condition (SCSI ID, Terminator setting): Only for KV-S2025C/S2045C Series
5. Imprinter condition*1
Note
*1: This item is indicated only when the optional Imprinter is installed. (KV-S2045C/SU245C Series only)
9.3.4.

Scanner Counter

Item
Update All Counter 1. Click "Update All Counter" to update counter's values.
2. Confirm the values of the "System"
"After Clean Roller", and "After Replace Roller" are also updated on
the main menu (Service Utility).
Clear Counter for 1. Click "Clear Counter" for "After Clean Roller" to clear the counter for
cleaning roller cleaning roller.
2. Click "OK" to clear the counter on Service Utility dialog box.
3. Confirm the counter value is zero on the main menu (Service Utility).
Clear Counter for 1. Click "Clear Counter" for "After Replace Roller" to clear the counter
replacing roller for replacing roller.
2. Click "OK" to clear the counter on Service Utility dialog box.
3. Confirm the counter value is zero on the main menu (Service Utility).
ST3 ST4
00 00 No error
00 00 Stop by clicking "STOP"
00 00 Stop by ADF stop-command
00 00 No paper error
00 00 Paper Feed Jam
00 00 Jam1 (around conveyor)
x x Jam2 (around conveyor)
00 00 Jam1 (around exit roller)
00 00 Document remains in scanner
00 00 Double feed error
00 00 Door open
x 00 SRAM error in G/A 1
x 00 Shading memory 1 error for G/A1
x 00 Shading memory 2 error for G/A1
x 00 Line memory error for G/A1
x 00 DRAM error for G/A1
x 00 SRAM error in G/A2
x 00 Shading memory 1 error for G/A2
x 00 Shading memory 2 error for G/A2
x 00 Line memory error for G/A2
x 00 DRAM error for G/A2
x x G/A 1 Error
x x G/A 2 Error
00 00 Waiting sensor error
00 00 Starting position sensor error
00 00 Ending sensor error
00 00 Front side lighting error (ST2: LED color 0: Red, 1: Green, 2: Blue)
00 00 Back side lighting error (ST2: LED color 0: Red, 1: Green, 2: Blue)
Operation
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
Contents
Default
—
—
—
63
Remarks
After cleaning or replacing rollers,
execute this item.
After replacing rollers, execute this
item.