Setting Initial Value Of E-Mail Subject - Konica Minolta bizhub C650 User Manual

Registering/Settings
5
Touch [Subject].
6
Change the subject in the displayed screen and then touch [OK].
– For details on text input operation, refer to "Entering text" on page 11-3.
7
Touch [OK].
– Touch [Cancel] to discontinue the change.
The subject is changed.
8
Touch [Close].
– Returns to procedure 4 when the change of subject is continued.
9
Touch [Close] until it returns to Fax/Scan screen.

Setting initial value of E-mail subject

The subject set here as initial value is used by internet fax transmission. The following procedure describes
how to set initial value of E-mail subject.
1
Display Create One-Touch Destination screen.
– For details on display methods of Create One-Touch Destination screen, refer to "Displaying the fax
registration screen" on page 8-2.
2
Touch [E-Mail Settings].
– In the Utility mode, numbers displayed on buttons can be entered and selected with the keypad. For
[E-Mail Settings], enter [4] with the keypad.
C650
8
8-27