Specifying Report Printing Methods (Report Setting); Specifying Report Settings - Konica Minolta bizhub C650 User Manual

Utility mode
9.26

Specifying Report Printing Methods (Report Setting)

Report printing method is set.
Activity Report: ON*/ OFF
If "ON" is selected, settings can be specified for the following.
Output Setting: Daily/Every 100 comm.*/100/daily
If "Daily" or "100/daily" is selected, settings can be specified for the following.
Output Time Settings: 00:00 to 23:59 (9:00*)
- Select whether or not to print the Activity Report, and when to print it.
If "Daily" is selected, the report is printed every day at a fixed time.
If "100/daily" is selected, a report is printed that contains information about the latest 100
communications that were completed since the last report was printed. In addition, the report is printed
every day at a fixed time.
TX Result Report: ON/If TX Fails*/ OFF
- Whether to print the TX Result Report or not is set and when the report is to be printed is set.
Sequential TX Report: ON*/ OFF
- Whether Sequential TX Report is printed or not is set.
Broadcast Result Report: All Destinations*/Each Destination
- The printing methods for Broadcast Result Report are set.
- When [Each Destination] is selected, Broadcast Report is output only when fax cannot be sent even
after redial. It is not output when communication is terminated normally.
TX Result Report Check
- Whether or not to display the transmission report selection screen is set. When set to [ON], it is
displayed every time there is a transmission.
*1
- When [ON] is set in [TX Result Report Check], the transmission result report is printed when [Yes] is
touched on the screen displayed during fax transmission. It is not printed if [No] is touched.
Network Fax RX Error Report: ON*/OFF
- Whether or not to print network fax reception error report is set.
MDN Message: ON*/OFF
- Whether to print the MDN message automatically is set.
DSN Message: ON/OFF*
- Whether to print the DSN message automatically is set.
Print E-mail Message Body: ON*/OFF
- Whether or not to print the text of received E-mail automatically is set.
* is a default value at the time of purchase.
Note
Other settings of report output are not used in network fax. For details, refer to the User's Guide [Fax
Operations].

Specifying Report Settings

1
Display administrator settings screen after referring to "Displaying Administrator Settings screen" on
page 9-3.
2
Touch [Fax Settings].
– Some items may not be displayed according to setting options.
C650
*1
: ON/OFF*
9
9-65