Table of Contents
Advertisement
retention arm
Gently press the card into the AGP connector until it clicks into place, ensuring that
4
the tab fits into the notch on the front end of the card.
Lower the retention arm and press it into place, securing the card(s) in the computer.
5
Close the computer cover (see page 117).
6
Connect the monitor cable to the card's video connector.
7
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
Connect your computer and devices to electrical outlets, and turn them on.
8
Drives
Overview
Your computer supports one floppy drive and a maximum combination of up to four of any
of the following drives.
NOTE: Install only IDE hard drives
install both types of drives.
•
Two hard drives (IDE, Serial ATA)
•
Two CD or DVD drives
or
serial ATA hard drives in your computer. You cannot
AGP card
lever
edge connector
AGP connector
PCI connector
Rem ov i ng a n d I n s t a l l i n g Par t s
95
Advertisement
Table of Contents
