Table of Contents
Advertisement
bottom anchor tabs (2)
Installing the Microprocessor Airflow Shroud
Follow the instructions in "Before You Begin" on page 80.
1
Open the computer cover (see page 82).
2
Insert the bottom anchor tabs into the anchor slots.
3
Align and insert the side anchor tabs into the anchor slots.
4
Press the indentations until the top anchor tabs on the shroud snap securely into
5
place.
Close the computer cover (see page 117).
6
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then
plug it into the computer.
Connect your computer and devices to electrical outlets, and turn them on.
7
106
Re m ov i n g a n d I ns t al l i n g Pa r t s
top anchor tabs (2)
side anchor tabs (2)
airflow shroud
indentations
Advertisement
Table of Contents
