Solid-State Drives; Solid-State Drive (Half-Length) - Dell OptiPlex Tower 7010 Owner's Manual

Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot and press the memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the side cover.
2. Follow the procedure in

Solid-state drives

Solid-state drive (half-length)

Removing the M.2230 solid-state drives
Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the M.2230 solid-state drives and provides a visual representation of the removal
procedure.
after working inside your
Before working inside your
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs) 51