Hard Drives - Dell Precision Rack 7910 Owner's Manual

Figure 7. Installing the memory module
a. memory module
b. alignment key
c. memory-module socket ejector (2)
When the memory module is properly seated in the socket, the levers on the memory module socket align with the levers on
the other sockets that have memory modules installed.
6. Repeat steps 4 and 5 of this procedure to install the remaining memory modules.
Next steps
1. Install the cooling shroud.
2. Follow the procedure listed in After working inside your system .
3. Press <F2> to enter System Setup, and check the System Memory setting.
The system should have already changed the value to reflect the installed memory.
4. If the value is incorrect, one or more of the memory modules may not be installed properly. Repeat step 4 through step 7 of
this procedure, checking to ensure that the memory modules are firmly seated in their sockets.
5. Run the system memory test in the system diagnostics.
To see a video on how to remove & install memory, scan this QR code, or click here:
R7910/DIMMs

Hard drives

Your system supports Client and Enterprise-class hard drives, which are designed for 24x7 operating environment. Selecting
the correct drive class will enable the critical areas of quality, functionality, performance, and reliability to be optimized for the
target implementation.
Due to industry advances, in some cases, the larger capacity drives have been changed to a larger sector size. The larger sector
size can have impacts on operating systems and applications.
http://www.Dell.com/QRL/Workstation/
Installing and removing system components 27