Steps
1. Ensure that the securing clips are in an open position.
2. Align the notch on the memory module with the tab on the memory-module slot.
3. Press down on the memory module until the memory module snaps into position and the securing clip locks in place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges. Do not touch
the components on the memory module.
NOTE:
Repeat step 1 to step 3 to install more than one memory module in your computer.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Solid-state drives
Solid-state drive (half-length)
Removing the M.2230 solid-state drives
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
60
Removing and installing Customer Replaceable Units (CRUs)
after working inside your
Before working inside your
computer.
computer.