Sony IPELA NSR-500 Series User Manual page 75

F Associate recording data with alarm
This item is displayed for schedule recording.
Select the check box to associate the recording data with
the alarm.
If you enable association and perform an alarm search, you
can search for scheduled recordings that exist at the
moment the alarm was triggered.
If you enable association, configure the input connectors
of the camera or I/O device that will act as the alarm
trigger.
G Alarm/Event Trigger
Select the relationship of the camera for recording and the
sensor, and select the check box of the input to be the
alarm/event trigger.
For details on the relationship of the camera and sensor,
refer to "About Relationship Between Sensor and Camera
when Alarm Occurs" (page 72).
Record by each alarm/event
The camera and sensor form a one-to-one relationship.
Recording is started only for the camera of the sensor
that detected the alarm/event.
Record by selected alarm/event
Multiple inputs can be set for the one camera that is the
target for recording. Since recording can be started by
an input signal (alarm/event) from an external device
to an I/O device, it is also possible for the sensor of a
device that is not set for the schedule to act as the
trigger.
Camera
Select the check box of the input to be the alarm/event
trigger.
When "Record by selected alarm/event" is selected,
you can select multiple device inputs.
If the check box for "Show All Triggers" is selected, a
list of all the triggers configured for NSR is displayed,
so it is also possible for the sensors of devices not
configured for the schedule to act as triggers.
Note
The input configured for each camera is displayed in
the list. For the configuring inputs, refer to
"Configuring Motion Detection Settings" (page 59)
and "Configuring Sensor Inputs" (page 76).
H Record Camera
Add the camera to become the target for recording to the
list, and configure settings related to images captured from
the camera.
Add Device
This displays the Add Device dialog box for adding a
device to the list.
Select the camera you want to add from the [Non-
target Camera] list, click [Add] to move the camera to
the [Target Camera] list, and click [OK].
Camera List
Select the image size, frame rate, and other items for
images captured from the camera, as necessary.
Adjust to Camera Settings
Match the values to those configured on the [Video]
tab in "Device Configuration."
Note
When the time set for regular recording and alarm
recording overlap, and the resolution for regular
×
recording is set to 320
alarm recording is set to 640
for images captured from the camera becomes 640
480 dpi. Normally, images captured from cameras use
the maximum frame rate and resolution values for all
actions during operation.
I OK
This creates a schedule in accordance with the set values,
and closes the dialog box.
J Cancel
This cancels your settings, and closes the dialog box.
240 dpi and the resolution for
×
480 dpi, the resolution
Configuring Recording Schedules
×
75