Configuring Mail Notification Settings - Sony IPELA NSR-500 Series User Manual

Configuring Mail
Notification Settings
When an event occurs, a notification can be sent by e-mail
to a pre-registered mail address.
You can configure a mail address for each action. Specify
the SMTP server and sender address here.
1
Click [Server] at the top of the Configuration window.
The Server Configuration screen appears.
2
Select the server for which you want to set the mail
notification settings from the [Server] tree on the left
of the screen.
3
Configure each item on the [E-mail] tab, and click
[Apply].
1
1 Enter the address of the SMTP server.
2 Enter the port number of the SMTP server.
3 Enter the mail address of the sender.
4 When using SMTP authentication, select the check
box next to [Authentication], and then enter the
user name and password for SMTP authentication.
5 Enter the mail address for sending test mail.
6 After you enter each address, click [Send Test Mail]
7 Click [Apply].
2
3
4
5
6
7
and confirm that mail can be sent correctly.

Configuring Mail Notification Settings

89