Sony IPELA NSR-500 Series User Manual page 88

Send e-mail
Select the check box to send a notification by mail to a
specified mail address.
E-mail Address
Enter an e-mail address.
For details on mail notification settings, refer to
"Configuring Mail Notification Settings"
(page 89).
Attach Camera Image
Select the check box to send a still image as a mail
attachment.
If you select this, specify the camera for recording
the still image.
Note
If the codec of the camera is MPEG4/H.264, the
image is not attached.
Each camera
Attach the still images recorded with the camera for
which the event occurred.
For example, when motion detection of camera A
and sensor input of camera B are configured as the
triggers and motion detection occurs for camera A,
the still images recorded with camera A are
attached. When the sensor input of camera B turns
on, the still images recorded with camera B are
attached.
Specified Camera
Attach still images recorded with a specified
camera.
Message
Enter the message of the mail. It can be up to 32
characters long.
Change Layout
Select the check box to change the monitor layout of
monitor 1.
If you select this, select the monitor layout to display
on monitor 1.
Beep
Select the check box to play a beep tone.
If you select this, select a beep tone.
The beep sound is output for a predetermined duration
from the device connected to the audio connector
specified in the Audio screen of the Setup Wizard or
the Setup Menu.
Notify Emergency Event
Select the check box to enable notifications for the
specified emergency events.
88
Configuring Action Settings
I OK
This creates an event/alarm action in accordance with the
set values, and closes the dialog box.
J Cancel
This cancels your settings, and closes the dialog box.