Configuring Alarm Output Settings; Changing Settings Of Alarm Output Pins Of Nsr; Changing Settings Of Alarm Output Pins Of Camera - Sony IPELA NSR-500 Series User Manual

Configuring Alarm Output
Settings
You can configure settings related to the alarm outputs
incorporated in NSR and cameras, and Barionet (Barix I/O
box) alarm outputs.
Outputs are used to transmit alarms to devices equipped
with alarm input functions, such as warning lamps and
door opening devices.
Example of Alarm Outputs:
Warning siren, warning lamp, light, door, etc.
You can configure the following settings for alarm
outputs.
• "Changing Settings of Alarm Output Pins of NSR"
(page 79)
• "Changing Settings of Alarm Output Pins of Camera"
(page 79)
• "Changing Settings of Alarm Output Pins of Barionet"
(page 80)
Changing Settings of Alarm Output
Pins of NSR
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Open [I/O Device] in the [Device] tree, and click to
select [System I/O].
3
Configure each item on the [Physical Alarm Out] tab,
and click [Apply].
For details on each of the items, refer to "[Alarm Out]
Tab (I/O Device)" (page 80).
The alarm output settings are changed.
Changing Settings of Alarm Output
Pins of Camera
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the camera you want to change the settings of
the alarm output pins from the [Device] tree.

Configuring Alarm Output Settings

79