Sony IPELA NSR-500 Series User Manual page 84

Camera Control
Select the check box to perform an action for
controlling the camera, and specify the control
method.
Preset
This moves the camera to the specified preset
position.
Tour
This performs the specified camera tour.
Action End Preset
Specify the preset position for when the action
ends.
Pin List
Select the check boxes for the pins to be target for
performing an action to change the pin state.
[I/O Device Action] Tab
Number of Settings
This displays the number of I/O devices target for the
action.
[Add Device] Button
This displays a dialog box for adding an I/O device as
a target for the action.
I/O Device Drop-down Menu
Select the I/O device.
Pin List
Select the check boxes of the pins for which to change
the state.
84
Configuring Action Settings
[System Action] Tab
Send e-mail
Select the check box to send a notification by mail to a
specified mail address.
E-mail Address
Enter an e-mail address.
Attach Camera Image
Select the check box to send a still image as a mail
attachment.
If you select this, specify the camera for recording the
still image.
Note
Images will not be attached for cameras on which the
codec is MPEG4/H.264.
Each camera
Attach the still images recorded with the camera for
which the event occurred.
For example, when motion detection of camera A and
sensor input of camera B are configured as the triggers
and motion detection occurs for camera A, the still
images recorded with camera A are attached. When
the sensor input of camera B turns on, the still images
recorded with camera B are attached.
Specified Camera
Record a still image with the specified camera.
Message
Enter the message of the mail. It can be up to 32
characters long.
Change Layout
Select the check box to change the monitor layout of
monitor 1.
If you select this, select the monitor layout to display on
monitor 1.
This item is only displayed for a server.