System Administration; Monitoring The Error Status - Sony IPELA NSR-500 Series User Manual

Setting Items of Still Image Export Dialog
Box
This dialog box is displayed by clicking
Image) on the Main screen. After configuring each item,
click [OK].
File Name
Enter the file name.
If a file with the same name as the file name entered
already exists at the export location, the file may be
exported under a different file name.
Location
Select the output location for the export file.
Capacity Requirement
This displays the capacity required to export the specified
still image.
Available (MB)
This displays the free capacity of the output location.

System Administration

(Capture Still
This section describes the operations necessary for routine
system administration.
• "Shutting Down and Restarting the NSR" (page 32)
• "Monitoring the Error Status" (page 115)
• "Exporting Log Files" (page 116)

Monitoring the Error Status

When an error occurs with NSR, you can confirm the error
with the ERROR lamp in the main screen or on the front of
NSR.
The ERROR Lamp on the Main Screen
When a major hardware or software error is detected, the
ERROR lamp at the bottom right of the main screen lights.
Confirming the Error Content
You can view the log by clicking the ERROR lamp to
display the Log dialog box.
You can also view the log by performing the following.
1
Click
The Log dialog box appears.
2
Confirm the error content.
Select System, Event/Alarm, or Operation from [Log
Type].
at the top of the main screen.
System Administration
115