Configuring Audio; Settings Related To Monitoring; Configuring Monitor Layout Settings - Sony IPELA NSR-500 Series User Manual

Configuring Audio

Configure settings for monitoring audio.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the camera for which to enable audio, and click
the [Audio] tab.
3
Configure each item, and click [Apply].
Enable
Select this check box to allow the NSR to receive
audio from the camera.
To monitor audio, the microphone input on the camera
must also be enabled.
Caution
If you clear the check box to disable audio and then
play back a recording that was created while audio was
enabled, the audio will not play back. To play back the
audio in such cases, select the check box and re-enable
audio first.
Codec
Specify the audio codec.
Record
Select this check box to record audio from the camera.
Settings Related to
Monitoring
You can configure the following settings related to the
monitor layout and camera images.
• "Configuring Monitor Layout Settings" (page 51)
You can create multiple layouts according to your
operating environment and objective.
• "Assigning Cameras to Monitor Frames" (page 57)
You can assign a camera to each monitor frame.
• "Configuring Layout Tours" (page 57)
You can sequentially switch the display of each display
at a preset time.

Configuring Monitor Layout Settings

By setting the number and size of camera monitor frames,
you can create a layout according to your operating
environment and objective.
Notes
• When you register a camera, the layouts 2×2, 3×3, and
4×4 are created as the default layouts automatically. The
size of the monitor frame cannot be changed for the
default layout.
• Created layouts are saved on the NSR they are created
on. For example, layouts created on a remote client
(RealShot Manager Advanced Client Software) are
saved on the remote client.
Creating a New Layout
1
Click [Layout] at the top of the Configuration window.
The Layout Configuration screen appears.
2
Select "Custom Layout A" or "Custom Layout B"
from the [Layout] tree, and click (Add).

Settings Related to Monitoring

51