Connecting The Printer To The Network - Dell M5200 Medium Workgroup Mono Laser Printer User Manual
Dell™ workgroup laser printer m5200 user's guide
Hide thumbs
Also See for M5200 Medium Workgroup Mono Laser Printer:
- Owner's manual (100 pages) ,
- Quick reference (2 pages) ,
- Supplementary manual (2 pages)
Table of Contents
Advertisement
3.
4.
Click Update, and then click Apply.
Connecting the printer to the network
To attach the printer to a computer:
1.
Make sure the printer, computer, and any other attached devices are turned off and unplugged.
2.
Remove the red plug from the Ethernet port on the back of the printer.
3.
Plug one end of a standard category 5 cable into a LAN drop or hub, and the other end into the
Ethernet port on the back of the printer. The printer automatically adjusts for the network speed.
2 Ethernet port
Turn on the printer
1.
Plug one end of the printer power cord into the socket at the back of the printer and the other end into
a properly grounded outlet.
Advertisement
Table of Contents
