4.
Make sure the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP
Feeder Type) are set to the correct value for the print media you are loading. (See
and
Paper Type
Press Go to return to Ready.
NOTE:
Software settings may override operator panel settings.
Closing the multipurpose feeder
1.
Remove print media from the multipurpose feeder.
2.
Push the metal bar straight back to collapse the multipurpose feeder to its short-length position.
3.
Close the multipurpose feeder door.
Using and loading the optional envelope feeder
1.
Gently adjust the envelope support for the size you are loading:
Fully closed (pushed in toward the printer) for short envelopes
for detailed information about these settings.)
Paper Size