Dell M5200 Medium Workgroup Mono Laser Printer User Manual page 31

b.
c. Press Menu until you see Print Menus, and then press Select to print the page. The message
Printing Menus appears on the display.
d. Verify the duplex unit is listed under "Installed Features."
e. If it is not listed, turn the printer off, unplug the power cord, and reinstall the duplex unit.
3. Update your driver by following the instructions in the table. If the printer is on the network, update
the driver for each client.
Windows XP 1.
2.
3.
4.
Windows 2000 1.
2.
Windows NT 4.0
3.
4.
Windows Me 1.
2.
Windows 95/98
3.
4.
If Update is unavailable, follow these steps:
a. In the Available Options list, click Duplex Option.
b. Click Add.
c. Click OK, and then close the Printers folder.
If Update Now is unavailable, follow these steps:
a. In the Options list, find Duplex Option.
b. Change the setting from Not Installed to Installed.
c. Click OK, and then close the Printers folder.
To make duplexing the default for all print jobs:
You can set up your driver so the printer always duplexes unless you say otherwise for a particular job. This
is handy if you usually print on both sides of the page (to save paper, for example).
To make duplexing the default, follow the steps below.
1. For Windows XP only: Click Start
Click Start Settings
Right-click the Dell Laser Printer M5200 icon.
Click Properties Device (or Options)
Click OK OK. Close the Printers folder.
Click Start Settings
Right-click the Dell Laser Printer M5200 icon.
Click Properties Device (or Options)
Click OK OK. Close the Printers folder.
Click Start Settings
Right-click the Dell Laser Printer M5200 icon.
Click Properties Device (or Features)
Click OK OK. Close the Printers folder.
Settings
Printers and Faxes.
Update (or Update Now).
Printers.
Update (or Update Now).
Printers.
Update (or Update Now).
Printers and Faxes.