Removing Options; Removing Optional Printer Memory Cards - Dell M5200 Medium Workgroup Mono Laser Printer User Manual
Dell™ workgroup laser printer m5200 user's guide
Hide thumbs
Also See for M5200 Medium Workgroup Mono Laser Printer:
- Owner's manual (100 pages) ,
- Quick reference (2 pages) ,
- Supplementary manual (2 pages)
Table of Contents
Advertisement
Removing options
Removing optional printer memory cards
Removing the envelope feeder
Removing the printer from the duplex unit, removing a duplex unit from a drawer and removing a drawer
from another drawer
If the printer location needs to change or the printer and print media handling options need to be shipped to
a new location, all print media handling options must be removed from the printer. For shipping, pack the
printer and print media handling options securely to avoid damage.
The following sections explain how to remove options from the printer that were installed above the printer
and how to remove the printer from options installed below it.
Removing optional printer memory cards
NOTICE:
Memory cards are easily damaged by static electricity. Touch something metal on the
printer before you touch a card.
CAUTION:
Before performing any of the procedures listed below, read and follow the safety
instructions in your Owner's Manual.
1.
Access the system board:
a.
Turn the printer power off, unplug the printer power cord, and disconnect all cables from the
back of the printer.
b.
Press latch 1 to open the lower door. Press latch 2 to open the upper door.
Advertisement
Table of Contents
