5.
Repeat
step
3and
step 4
6.
Gently release the pick roller arm.
7.
Insert the standard tray.
Resetting the maintenance counter
After replacing all the items in the maintenance kit, reset the maintenance counter:
1.
Press and hold the Select and Return buttons while you turn the printer on.
2.
Release the buttons when Performing Self Test appears on the display.
The printer performs its power-on sequence, and then Config Menu appears on the first line of the
display.
3.
Press Menu until you see Reset Maint Cnt and then press Select.
Reset appears on the second line of the display.
4.
Press Select.
Resetting Maint Cnt Value appears briefly on the display, and then is replaced by Config Menu on
the top line and Reset Maint Cnt on the second line.
5.
to install the other pick roller.