If Error Occurs With The Specified Paper Size And Type; Printing From A Selected Tray - Ricoh SP 5200S Operating Instructions Manual

If Error Occurs with the Specified Paper Size
and Type
An error message appears on the control panel when there is no tray for the selected paper size or type,
or when paper loaded in the machine has run out. In that case, you can select the tray manually to
continue printing, or cancel a print job.
• The tray cannot be changed if the following functions are set:
• Staple
• Front Cover Sheet
• Back Cover Sheet
• Slip Sheet
• Chaptering
• Chapter Slip Sheets
• If you cancel duplex printing through the error message, printing will continue from the tray that
you select manually.
• If any of the following functions are set, you can continue printing by canceling the function:
• Staple
• Duplex
• If [Auto Continue] is enabled, printing from the manually selected tray will begin after a specified
interval. For details about [Auto Continue], see "System".
• p.155 "System"

Printing from a Selected Tray

Use the following procedure to manually select the tray from which printing will continue.
1. Press the [Printer] key.
2. Select a tray those that appear on the control panel to continue printing manually.
If you want to print after adding paper to the tray, select the tray after loading the correct paper.
3. Press [Continue].
The machine prints using the selected tray.

If Error Occurs with the Specified Paper Size and Type

2
95