Printing On Orientation-Fixed Or Two-Sided Paper - Ricoh SP 5200S Operating Instructions Manual

2. Printing Documents
Printing on Orientation-Fixed or Two-Sided
Paper
This section explains how to print on paper whose orientation and printing side are unchangeable
(letterhead paper, for example).
2
Use the settings and paper orientations shown below to ensure the machine prints onto orientation-fixed
paper (such as letterhead or continuous stationery) correctly. Specify [Auto Detect] or [On (Always)] for
[Letterhead Setting] under [Printer Features], and then place the paper as shown below. For details
about the letterhead settings, see "System".
Paper Orientation
1-sided print
2-sided print
1-sided print
• To print on letterhead paper when [Letterhead Setting] is set to [Auto Detect], you must specify
[Letterhead] as the paper type in the printer driver's settings.
• If a print job is changed partway through printing from 1-sided to 2-sided printing, 1-sided output
after the first copy may print facing a different direction. To ensure all paper is output facing the
same direction, specify different input trays for 1-sided and 2-sided printing. Note also that 2-sided
printing must be disabled for the tray specified for 1-sided printing.
• For details about how to make 2-sided prints, see "Printing on Both Sides of Sheets".
• p.155 "System"
68
Paper Trays 1 to 4
Letterhead Setting Letterhead Setting
[On (Always)]
Letterhead Setting
[Off] [On (Always)]
Bypass tray
Letterhead Setting
[Off]