connection
ConnectingtoaTVthathasnoAudio/VideoInputJacks
•
You can connect your camcorder to a TV through a VCR.
1. Connect the camcorder to your VCR with the Audio/Video cable.
•
The yellow jack: Video
•
The white jack: Audio(L) - mono
•
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the Select switch to TAPE.
(VP-D385( i ) only).
4. Press the MODE button to set
Player(
).
5. Turn on both the TV and VCR.
•
Set the input selector on the
VCR to line.
•
Select the channel reserved
for your VCR on the TV set.
6. Play the tape.
Playbackthetape
1. Connect a power source.
2. Insert the tape you wish to play back.
3. Set the Select switch to TAPE. (VP-D385( i ) only).
4. Press the MODE button to set Player(
5. Move the Joystick(/)left or right, find the first position you
wish to play back.
6. Press the Joystick.
•
The images you recorded will appear on the TV after a few
seconds.
•
If a tape reaches its end while being played back, the tape will
rewind automatically.
7. To stop the playback, move down the Joystick(▼).
•
The playback mode (SP/LP) is selected automatically.
•
If only a mono audio input is available on the TV set, use
the audio cable with the white jack (Audio L).
70_ English
VCR
TV
Signalflow
Antenna
).
连接
连接到没有音频 / 视频输入接口的电视机
•
您可以将摄录机通过 VCR 与电视机相连。
1.使用音频 / 视频电缆将摄录机与 VCR 相连。
Camcorder
AV
DV
AVJack
MODE
POWER
CHG
Audio/VideoCable
播放磁带
1.连接电源。
2.插入您想要播放的磁带。
3.切换存储介质为 TAPE。( 仅限 VP-D385( i ))
4.按下 MODE 按钮设置为 Player( 播放 ) 模式 (
5.向左或向右拨动操纵杆 (/),查找您想要播放的起始位置。
6.按下操纵杆。
•
过一小会儿之后,您所录制的内容将会出现在电视机屏幕上。
•
当播放的时候如果磁带到达终点,磁带将会自动倒回。
7.若要停止播放,请向下拨动操纵杆 ()。
•
自动选择播放模式 (SP/LP)。
•
如果电视机仅支持单声道输入,请使用音频电缆的白色端子
(Audio L)。
•
黄色端子:视频 ( Video)
•
白色端子: 音 频(左声道)-
单声道(Audio(L)-
mono)
•
红色端子: 音 频(右声道)
(Audio(R))
2.将电视机连接至 VCR。
3.切换存储介质为 TAPE。
( 仅限 VP-D385( i ))
4.按下 MODE 按钮设置为 Player( 播放 )
模式 (
)。
5.打开电视机和 VCR。
•
设置 VCR 上的输入选择器为线。
•
在电视机上选择 VCR 通道。
6.播放磁带。
)。
中文 _70