basic recording
AUTOFOCUS/MANUALFOCUS
•
The Auto Focus/Manual Focus function works in both Camera and M.Cam
modes. ➥page 18
•
In most situations, it is better to use the automatic focus feature, as it
enables you to concentrate on the creative side of your recording.
•
Manual focussing may be necessary under certain conditions that make
automatic focussing difficult or unreliable.
•
Adjust the Auto Focus / Manual Focus functions only by using the joystick.
AutoFocus
•
If you are inexperienced in the use of camcorders,
we recommend that you make use of auto focus.
ManualFocus
•
In the following situations, you may obtain better
results by adjusting the focus manually.
a. A picture containing several objects, some close to
the camcorder, others further away.
b. A person enveloped in fog or surrounded by snow.
c. Very shiny or glossy surfaces like a car.
d. People or objects moving constantly or quickly like
an athlete or a crowd.
SettingtheFocus
1. Set the Selectswitch to CARD or TAPE.
(VP-D385( i ) only)
2. Press the MODE button to set Camera(
3. Press the Joystick.
•
Quick menu will appear.
4. Move down the Joystick(▼) to select the
"ManualFocus"mode.
•
You can toggle between "AutoFocus" and "Manual
Focus" by moving down the Joystick(▼).
•
Move theJoystick( /) left or right to select
the desired manualfocus value, then press the
Joystick.
5. To exit, press the Joystick.
•
Manual focus indicator (
will be displayed on the LCD screen.
Manual focus is not available in the EASY.Q mode.
42_ English
a
c
).
) and the status bar
Manual Focus
基本录制
自动聚焦 / 手动聚焦
•
自动聚焦 / 手动聚焦功能用于 Camera( 摄像 ) 模式和 M.Cam( 存储卡摄
像 ) 模式。➥ 第 18 页
•
在大部分情况下,最好使用自动聚焦功能,因为它能够帮助您将精力集
中在拍摄的创意上。
•
在某些特定的条件下,自动聚焦很难或不如人意,则应该使用或必须使
用手动聚焦功能。
•
仅可通过操纵杆设定自动聚焦 / 手动聚焦功能。
自动聚焦
b
•
如果您队摄录机的使用不太熟悉,我们建议您采用
自动聚焦的方式。
手动聚焦
•
在下列情况时, 采用手动聚焦会获得更好的拍摄效果。
d
a. 画 面中有若干被摄入的物体,一些被摄物体靠近摄
录机,另一些被摄物体则离摄录机较远。
b. 人物被雾气笼罩或者四面都是雪景。
c. 发光或光滑的表面,如车辆。
d. 始终在移动或快速移动的人物或者被摄物体,如运
动员或人群。
设置聚焦
1. 切换存储介质为 CARD 或 TAPE。( 仅限 VP-D385( i ))
2. 按下 MODE 按钮设置为 Camera( 摄像 ) 模式 (
3. 按下操纵杆。
•
屏幕上显示快捷菜单。
4. 向下拨动操纵杆 (▼) 设置为
"ManualFocus( 手动聚焦 )" 模式。
CHG.
•
您可以向下拨动操纵杆 (▼),选择 "AutoFocus
( 自动聚焦 )" 或 "ManualFocus( 手动聚焦 )"。
•
0:00:30
向左或向右拨动操纵杆 (/) 选择适当的手动聚焦
STBY
SP
10Sec
60min
参数值,然后按下操纵杆确认。
16Bit
S
5. 若要退出,请按下操纵杆。
•
手动聚焦指示图标 (
LCD 屏幕上。
在 EASY.Q 模式下不支持使用手动聚焦功能。
)。
) 和控制条将同时显示在
中文 _42