RECORDINGANIMAGEFROMATAPEAS
APHOTOIMAGE
•
This function works only in Player mode.
➥page 18
•
Your camcorder can read moving image data
recorded on a tape, and record it as a photo image
on a memory card.
Beforeoperation
Insert a recorded tape and a memory card into your
camcorder.
1. Set the Select switch to TAPE.
2. Press the MODE button to set Player(
3. Press the Joystick, playback the cassette.
•
The image recorded on the tape is played back.
4. Press the PHOTO button.
•
The photo image is recorded on the memory
card.
•
During the time it takes to save an image, the
playback screen is paused and the OSD is
displayed.
5. When you finish the recording, move down the
Joystick(▼) to stop recoding and switch the
mode to M.Player for your visual reference.
➥page 79
•
Photo images copied from the cassette to the memory card
are saved in 640x480 format.
•
Number of images you can save varies depending on the
image resolution.
87_ English
从磁带上的影音图像捕捉一张照片图像保存在存储卡上
PHOTO
PO W
ER
CH G
0:00:16:24
STOP
SP
MIX[1+2]
).
12:00 1.JAN.2008
0:00:16:24
STOP
SP
MIX[1+2]
Photo Copy
Now coping...
12:00 1.JAN.2008
•
此功能仅可在 Player( 播放 ) 模式下使用。
➥ 第 18 页
•
本摄录机可以从磁带读取影音图像,然后捕捉一张
照片图像保存在存储卡上。
操作之前
在摄录机内插入录好磁带和存储卡。
60min
1.切换存储介质为 TAPE。
16BIt
S
2.按下 MODE 按钮设置为 Player( 播放 ) 模式 (
3.按下操纵杆,播放磁带。
AV In
•
播放磁带上的图像。
4.按下 PHOTO 按钮。
•
捕捉的照片图像被保存在存储卡上。
•
在保存该图像的过程中,OSD 显示为播放暂停
60min
状态。
16BIt
S
5.当拍摄完成时,向下拨动操纵杆 () 停止拍摄,
然后切换为 M.Player( 存储卡播放 ) 模式查看
AV In
被捕捉到的图像。➥ 第 79 页
•
从磁带上捕捉到的照片图像,以 640x480的格式被保存在
存储卡内。
•
根据图像的分辨率,决定您可以保存的图像数量。
)。
中文 _87