Loading Paper In Trays 3 And 4 - Xerox 4110 Getting Started

Loading paper in trays 3 and 4

X er o x 4 5 90 EP S / 4110 EP S G e tti n g Sta r te d
Use the following procedure for loading paper in trays 3 and 4.
NOTE: When the machine runs out of paper during a print job, the
UI displays a message. Follow the instructions on the UI for
adding paper to the appropriate tray or trays. The print job
automatically resumes once paper is added.
1. Slowly pull out the tray until it stops.
2. Remove any paper from the tray.
3. Expand the two paper guide levers to the desired paper size.
4. Load and align the edge of the paper against the left edge of
the tray with the side to be printed on facing up.
3. L oa d i ng pap e r
3-3