Xerox 4110 Getting Started page 10

1. O ve r v i ew
No. Component
19 Post-process inserter
(Tray 8)
20 Decurl button
21 Output tray
22 Finisher tray
23 Booklet output tray
24 Booklet output tray
button
25 Right cover
26 Staple cartridges for
booklet
27 Staple cartridge
28 Staple waste
container
29 Punch scrap
container
30 Tri-Fold output tray
(optional)
31 Left cover
32 Tri-Fold output tray
button
1- 6
Loads and inserts offset and color documents, preprinted tabs, covers, or
transparency separators.
For lighter weight paper especially, press this button to decurl the output.
Prints are delivered here when specific output features are selected, such as
Automatic sorting, Collated, Uncollated or Normal.
Receives prints when you select Stapled, Punched and Z-folded.
Receives prints when you select Bi-Fold or Bi-Fold + Stapling.
Press this button to deliver and retrieve booklets from the output area.
Open to clear paper jams, replace staples, clear jammed staples or remove
the scraps from the puncher.
There are two staple cartridges for booklets. Remove this cartridge to replace
staples and clear staple jams.
Contains staples. Remove this cartridge to replace staples and clear staple
jams.
Collects the staple wire cuttings from the 4 staple cartridges. Open to remove
and replace the waste container.
Collects the scraps from the puncher. Open to remove the scraps.
Receives prints when you select Tri-Fold In or Tri-Fold Out.
Open this cover to access the machine and to clear paper jams.
Press this button to open the Tri-Fold output tray.
NOTE: Throughout this guide, Finisher D2 and Booklet Finisher
may be referred to simply as the finisher.
Function
X er ox 4 59 0 E P S / 4110 E P S G e tt i ng Sta r te d