X er o x 4 5 90 EP S / 4110 EP S G e tti n g Sta r te d
Load tab paper in Tray 5 (Bypass)
1. Open Tray 5 (Bypass).
NOTE: If necessary, extend the extension flap. The extension flap
can be extended in two stages. When pulling out the
extension flap, do it gently.
2. Hold the center of the paper guides and slide them to the
desired paper size.
3. Place the paper with the side to be printed facing up and the
bottom side to be fed first. Insert the paper slowly to the end
along the paper guide.
3. L oa d i ng pap e r
3-11