Replacing The Lamp - Polaroid Polaview 305 User Manual

Replacing the lamp

Removing 1 Leave the projector running with the lamp off for at least
the old lamp
2 After the lamp has cooled sufficiently, turn off the projector
3 Slide the AC lock button in the direction of the arrow. You
4 As you slide open the AC lock button, remove the left side
Sliding the
rear panel off
of the projector
For best performance, you should replace the lamp after 700
hours of operation.
Note: Do not touch the lamp with your bare hands. Use
gloves or a soft cloth and handle it using the metal ends
only.
five minutes before you change the lamp. This allows the
fan to cool the lamp chamber.
and unplug the power cord. (As a safety feature, you cannot
open the lamp chamber until you disconnect the power
cord )
cannot move this button until you disconnect the power
cord from the projector.
cover by sliding it about 1/4 of an inch to the left. When the
cover releases, pull it straight off.
Maintenance 89