Table of Contents
Advertisement
34 Detailed setup
Connecting video
from S-video sources
The composite audio/video cable (part number C497-6) has
a yellow, red, and white RCA plug at each end. To connect
an NTSC, PAL, or SECAM source to your projector, make
the appropriate cable connections, as indicated in the fol-
lowing chart:
Cable
Projector port
Yellow
VIDEO 1 or 2
White
AUDIO 1 or 2 IN
(white plug)
Red
AUDIO 1 or 2 IN
(red plug)
The projector can also project video from an S-video
source.
1 Connect one end of the S-video cable (part number C466-6)
to the VIDEO OUT connector on the video source. The cable
has identical, round 4-pin connectors on either end.
2 Connect the other end of the cable to the projector
S-VIDEO 1 port.
VCR connector
VIDEO OUT,
TO MONITOR, etc.
L AUDIO OUT
R AUDIO OUT
Advertisement
Table of Contents
