Table of Contents
Advertisement
96 Maintenance
Replacing the batteries in the remote control
Temperature extremes
cable is keyed, so it only reattaches on one side. Also, make
sure that the arm release lever is in the release position
(fully to the left) before you replace the top cover.
1 Locate the battery compartment on the end of the remote
control. Press down while you slide the cover off of the
compartment.
2 Remove the old batteries and replace them with new ones.
Make sure you align the batteries in the proper direction.
3 Slide the cover back onto the battery compartment, snap-
ping it into place.
Do not store your projector in temperatures in excess of
140˚F (50˚C). The maximum operating temperature is 80˚F
(27˚C).
If you happen to expose the projector to extremely cold
temperatures, you should let it warm up to room tempera-
ture before you begin your presentation. In general, the rec-
ommended maximum operating temperature drops 1˚C for
every 1000 feet (305 meters) above sea level.
Advertisement
Table of Contents
