Table of Contents
Advertisement
4 Select one of these buttons, then use the Cyclops wand,
1 Click the Color box or the icon in the upper right corner of
The color-selection
boxes
2 Click the color you want to use, then click the Color box or
Note: If you use the optional Cyclops interactive pointer
system, you can also click above the image to activate the
Draw tool.
laser pointer, or the MouseDisk to draw on the projected
image.
To open the color palette:
the projected image. Eight color-selection boxes appear.
icon again to hide the color-selection boxes.
To draw, click and hold the MouseDisk for approximately
two seconds, then release it. Use the edges of the
MouseDisk to draw on the screen. When you are in Draw
mode, the cursor is black. When you are in Move mode, the
cursor is white.
To draw with the optional Cyclops interactive pointer sys-
tem, click and hold the Cyclops wand button while you
move the cursor around the screen. Release the button to
end the drawing.
Using the projector 57
Advertisement
Table of Contents
