Table of Contents
Advertisement
Replacing the lamp
1 Press POWER to turn off the projector and lamp. (The fans
2 When the fans stop turning and the projector is cool, unplug
3 Be sure to close the mirror, then close the projector down to
4 Turn the projector over and lay it on a flat, stable surface.
Before you attempt to replace the projector lamp,
Warning:
to avoid the risk of electrical shock, unplug the power cord
first from the AC wall outlet then from the projector AC
power-input jack.
continue to run for approximately three minutes.)
To avoid the risk of burning yourself, let the lamp
Warning:
access door and projector lamp cool down before you
attempt to replace the lamp.
the power cord from the AC wall outlet.
its storage position.
Note:
Typically, lamps have an average operating life of
approximately 30 hours. When illuminated, REPLACE LAMP
indicates that the projector lamp has reached this average
lamp operating life, and lamp failure may soon occur. You
may choose to replace the lamp or reset the LAMP HOURS
using the Menu-mode on-screen control, or you may
choose to continue using your projector until the lamp actu-
ally fails.
Maintenance 31
Advertisement
Table of Contents
