Replacing The Lamp - Polaroid Polaview 110 User Manual

46 Maintenance

Replacing the lamp

1 Turn off the projector.
2 Unplug the projector power cord from the wall socket and
3 Loosen and remove the screw located on the right side of
Removing the
service door
4 Loosen the 4 lamp-assembly screws (you cannot remove
Loosening the
lamp-assembly
screws
from the projector power receptacle.
the rear panel and remove the service door.
them from the service door).
Caution: The lamp assembly gets very hot during opera-
tion. Use appropriate care when changing lamps. Make sure
that the lamp assembly has cooled for at least 3 to 5 min-
utes before touching it.