Polaroid Polaview 305 User Manual page 14

8 Introduction
Macintosh computers
Connecting a Macintosh monitor requires the Polaview VGA
/MAC (part number C804) adapter and the existing monitor
cable. Use the Polaview adapter only.
1 Disconnect your computer-to-monitor cable at the computer
end.
2 Connect the free end of the monitor cable to the Polaview
VGA/MAC adapter.
3 Connect the free end of the Mac-to-LCD adapter to the pro-
jector VGA OUT connector.
4 Use the Polaview Mac-to-LCD connector cable (part number
C802-6) to link the projector to the computer. Connect the
end marked LCD to the projector COMPUTER IN connector,
and the end marked COMPUTER to the computer video-out-
put connector.
Proceed to the section Connecting video and audio .
Notebook computers
1 Connect the end of the video cable marked COMPUTER to
the external monitor connector on your notebook comput-
er(or to the video cable adapter supplied with your note-
book computer).
2 Connect the end of the video cable marked LCD to the
FROM COMPUTER connector on the projector.
Proceed to the section Connecting video and audio .
Silicon Graphics workstations
1 Disconnect your computer-to-monitor cable at the computer
end.
2 Connect the free end of the monitor cable to the SGI to LCD
adapter
3 Connect the free end of the SGI-to-LCD adapter to the pro-
jector COMPUTER OUT connector.