Table of Contents
Advertisement
7 Gently tilt the flip mirror open approximately 45˚ (you can
Opening the
flip mirror
Closing the projector
1 Tilt the mirror down into the arm until it latches.
2 Gently swing the arm down until it clicks into place. The
adjust the angle of the mirror later, to raise or lower the pro-
jected image).
Caution: Never push on or force the mirror. Always use
care when opening the mirror assembly. Avoid touching the
surface of the mirror with your fingers.
To close the projector, reverse the opening procedures.
latch should click when the arm is completely retracted.
Detailed setup 19
Advertisement
Table of Contents
