Table of Contents
Advertisement
Adjusting the audio
Displaying and hiding
the volume indicator
Adjusting the volume
Muting the audio
Adjusting bass
and treble
Adjusting fade
and balance
Adjusting the volume
of the microphone
Switching between
stereo and monaural
mode
You can adjust the volume from the remote control, the
control panel, or the menus. The Audio menu contains addi-
tional audio controls.
You can display a volume indicator while you increase or
decrease the volume of the internal speakers. To display the
volume indicator, choose Preferences, On-Screen, Display.
To suppress this visual indicator, set On-Screen to Hide.
To adjust the volume of the internal speakers and any exter-
nal speakers you connect, press the + or - VOLUME key on
the remote control or control panel. You can also make
adjustments through the Audio menu.
To mute the audio, press the MUTE key on the remote con-
trol, or choose Mute from the Audio menu.
To turn the sound back on, press the MUTE key a second
time or choose Mute, Normal from the Audio menu.
To adjust the level of bass or treble, choose the
corresponding command on the Audio menu, then move
the slide bar in the appropriate direction.
The fade slider allows you to choose between the internal
speakers in your projector and an external loudspeaker sys-
tem like the Polaview loudspeaker system (part number
A55). The balance slider allows you to control the level of
sound from the left and right sides of your sound system.
To adjust the fade and balance, choose the corresponding
command on the Audio menu, then move the slide bar in
the appropriate direction.
To increase or decrease the volume of the microphone,
choose Mic. Volume from the Audio menu, then move the
slide bar in the appropriate direction.
To switch between stereo and monaural mode, choose
Audio mode from the Audio menu, then choose the
appropriate setting.
Using the projector 53
Advertisement
Table of Contents
