Table of Contents
Advertisement
38 Detailed setup
Important precautions
Allow sufficient
air flow
To avoid any potential hazards to the projector, make sure
not to obstruct the air-intake and exhaust grills. Do not oper-
ate the projector if these areas are clogged or blocked.
Caution: The lamp chamber gets very hot during opera-
tion, especially the ceramic sockets at each end of the lamp.
Be careful when you open the lamp chamber or change the
lamp. To allow that area to cool down, press the
turn off the lamp and let the fan cool the projector for at
least five minutes before you touch any of those compo-
nents. See Chapter 5, Maintenance, for more information.
button to
Advertisement
Table of Contents
