Table of Contents
Advertisement
To set this up:
Connect this cable:
External
Mini-jack-to-RCA cable
speakers
adapter (C5105) and
mini-jack cable (included
with speakers)
Stereo system
RCA stereo cable
(comes with
stereo)
Microphone
Microphone cable
supplied with
microphone
Turning on
the projector
1 Plug the power cord into the projector power receptacle.
2 Move the switch power on the rear of the projector to the
3 Press the
4 To raise or lower the image, tilt the mirror assembly accord-
5 Rotate the ring at the base of the projector lens to focus the
From here:
AUDIO OUT 1, 2
ports on
projector
AUDIO OUT
port on
projector
MIC port on
projector
Once you connect the computer and any video or audio
sources, turn on the power:
Plug the other end into a properly-grounded wall outlet or
surge protector.
"on" position.
lamp on/off key to ignite the lamp. The lamp
lights slowly.
ingly.
image.
Introduction 11
To here:
Mini-jack
cable included
with speakers.
Left/right
AUDIO IN
ports on
amplifier
Amplified
microphone
Advertisement
Table of Contents
