.
Answering non-ACD calls
Follow these procedures to answer calls that are not Automatic Call
Distribution (ACD) calls. Incoming calls cause the telephone to sound and
the message indicator lamp to flash.
See
of the keys.
Navigation
•
•
Answering a call
Follow this procedure to answer the call.
Step
1
Answering a second call
Follow this procedure to answer a call when you are engaged in a call.
If another call comes in while the primary line is engaged, the phone
sounds and a message indicator icon on the display flashes. While the
indicator is flashing you have the opportunity to put the first call on hold
and answer the second call.
Copyright © 2009 Nortel Networks
.
Figure 1 "IP Phone 1150E components" (page 10)
"Answering a call" (page 45)
"Answering a second call" (page 45)
Action
Perform one of these actions to answer a call:
•
With the headset on, press the line key for the incoming call.
•
If using a handset, lift it and press the line key.
See
"Using a handset" (page
Carrier VoIP
Nortel IP Phone 1150E User Guide (CICM)
NN10300-025 04.01 Standard
24 April 2009
for the location
27).
--End--
45