Using Conference Call; Nn10300-025 04.01 Standard 24 April; Using The Mute Feature; Carrier Voip - Nortel 1150E User Manual

50 While on a non-ACD call
Step
1
2
3

Using conference call

Follow this procedure to engage in a conference call.
The Three Way Call (3WC) feature allows you to add three calls to a
conference. If six-port conference is available, you can add a maximum of
six calls to a conference. If six port conference is available, Conference
appears beside a feature key in the display.
Step
1
2
3
4
5

Using the mute feature

Muting prevents the transmission of sounds through the microphone.
Follow this procedure to use the mute feature.
Copyright © 2009 Nortel Networks
.
Action
During a call, press the key to which the transfer feature is
assigned.
The call is put on hold and a dial tone sounds. On the display,
an indicator flashes beside the line on which the call is held.
Enter the number to which to transfer the call.
When that number rings or is answered, press the transfer key
again.
The call is transferred.
Action
During a call, press the key to which the conference call feature
is assigned, either 3WC or Conference.
The call is put on hold and a dial tone sounds. On the display,
an indicator flashes beside the line on which the call is held.
Dial the number of the person you want to add to the call.
At this time, you can talk privately to the person you are adding,
to announce the conference.
Press the conference key again to merge the calls.
Repeat steps 2 and 3, to add more calls to the conference.
If you make a mistake dialing, or a party does not want to be
included in the conference, press the extension key of the
conference call to reconnect to the conference.

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard
24 April 2009
--End--
--End--