Bluetooth Headset Feature Activation; Carrier Voip; Nortel Ip Phone 1150E User Guide (Cicm - Nortel 1150E User Manual

3

Bluetooth headset feature activation

Feature activation using a Bluetooth wireless technology headset paired
with an IP Phone may be different from the headset manufacturers
instructions. When paired with an IP Phone the following limitations apply:
•
•
•
Call answer
Follow this procedure to answer an incoming call using a headset.
Step
1
2
Copyright © 2009 Nortel Networks
.
If you uncheck the first option and press the Exit key the wired
headset/handset will work after several seconds. If you uncheck
the second option you can immediately switch to the wired
headset/handset.
A check mark indicates that the wireless headset is active. Clear
the check mark to use a wired headset/handset. This option is
on (o) by default.
Press the Exit key to toggle this option on or off.
Feature activation on an IP Phone paired with a BT headset depends
on server implementation.
Call Transfer from headset to handset does not work in a handsfree
profile.
The administrator must provision Auto Answer on Ring against the user
to use the Call answer functionality.
Action
When there is an incoming call, press the In Calls key.
The incoming call is connected to the headset.
Press the Goodbye key to terminate the call.

Carrier VoIP

Nortel IP Phone 1150E User Guide (CICM)

NN10300-025 04.01 Standard
24 April 2009
Bluetooth headset feature activation 103
--End--
--End--