Bootp Relay Agent Interface Parameters - Nortel Remote Access for AN and Passport ARN Routers Configuration Manual

BootP Relay Agent Interface Parameters

Parameter: Input IP Address
Path: Configuration Manager > Protocols > IP > BOOTP >
Relay Agent Interface Table > Forward I/F > Add
Default: None
Options: Any valid IP address
Function: Specifies the IP interface that receives BootP request packets from an external
network. This interface must have BootP configured on it.
Instructions: Specify the IP address of the interface through which the router will receive
BootP requests.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.3
Parameter: Output IP Address
Path: Configuration Manager > Protocols > IP > BOOTP >
Relay Agent Interface Table > Forward I/F > Add
Default: None
Options: Any valid IP address
Function: Specifies the IP interface that forwards BootP request packets to an external
network.
Instructions: Specify the IP address of the interface through which the router will forward
BootP requests.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.4
308614-14.20 Rev 00
Site Manager Parameters
A-7